Heat Tracing





HTSX – Self Regulating Heating Cable

Applications – HTSX cables are used primarily for process maintenance and frost protection of piping which could be subject to steam cleaning up to 12 BARG saturated steam. HTSX was the ­rst matrix heater for process maintenance of temperatures up to 121°C. The low inrush feature of HTSX cable eliminates excessive ‘start up’ current. Options include braid and overjacket.

BSX – Self Regulating Heating Cable

Applications – BSX cables are used primarily for process maintenance and frost protection of piping in hazardous, non-hazardous or corrosive areas. Options include braid and overjacket.

RSX – Self Regulating Heating Cable

Applications – RSX cables are used primarily for process maintenance and frost protection of piping in hazardous, non-hazardous or corrosive areas. Able to run at higher amperage than the BSX cable. Options include braid and overjacket.

FLX – Self Regulating Heating Cable

Applications – FLX cables are designed to provide freeze and temperature maintenance to metallic and non-metallic piping, tanks and equipment. Options include braid and overjacket.

HPT – Power Limiting Heating Cable

Applications – HPT parallel resistance cables are designed for heating applications ranging from water freeze protection to process maintenance temperatures as high as 149°C. HPT is ideal for applications where steam purging or upset conditions preclude the use of lower temperature rated heat tracing cables. HPT is rated for a maximum continuous exposure temperature of 260°C (cable de-energised). Options include braid and overjacket.

EconoTrace – Constant Wattage Heating Cable (Type FP)

Applications – EconoTrace Type FP parallel resistance, constant wattage heating cables are for water freeze protection and process temperature maintenance up to 65°C. Options include braid and overjacket.